NSN 5210-01-355-2126 · NIIN 013552126 · FSC 5210
NO DASHES 5210013552126
In Stock
GAGE,THICKNESS
Measuring Tools, Craftsmen's
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABFF | FURNISHED ITEMS | BLADE LOCK |
| AEAE | BLADE LENGTH | INCHES NOMINAL 3.250 |
| AJLB | BLADE QUANTITY | 25 |
| BDLS | MEASUREMENT SYSTEM | ENGLISH |
| CMZF | BLADE TIP WIDTH | INCHES NOMINAL 0.500 |
| CNLG | BLADE GROUP QUANTITY | 2 |
| CPMW | BLADE THICKNESS | EIGHTEENTH BLADE INCHES 0.0230 |
| CPMW | BLADE THICKNESS | NINTH BLADE INCHES 0.0140 |
| CPMW | BLADE THICKNESS | TWELFTH BLADE INCHES 0.0170 |
| CPMW | BLADE THICKNESS | SIXTH BLADE INCHES 0.0110 |
| CPMW | BLADE THICKNESS | SEVENTH BLADE INCHES 0.0120 |
| CPMW | BLADE THICKNESS | SECOND BLADE INCHES 0.0070 |
| CPMW | BLADE THICKNESS | EIGHTH BLADE INCHES 0.0130 |
| CPMW | BLADE THICKNESS | FIRST BLADE INCHES 0.0060 |
| CPMW | BLADE THICKNESS | FIFTEENTH BLADE INCHES 0.0200 |
| CPMW | BLADE THICKNESS | THIRD BLADE INCHES 0.0080 |
| CPMW | BLADE THICKNESS | FOURTH BLADE INCHES 0.0090 |
| CPMW | BLADE THICKNESS | TWENTIETH BLADE INCHES 0.0250 |
| CPMW | BLADE THICKNESS | THIRTEENTH BLADE INCHES 0.0180 |
| CPMW | BLADE THICKNESS | NINETEENTH BLADE INCHES 0.0240 |
| CPMW | BLADE THICKNESS | TWENTY-SECOND BLADE INCHES 0.0270 |
| CPMW | BLADE THICKNESS | TWENTY-FIRST BLADE INCHES 0.0260 |
| CPMW | BLADE THICKNESS | TWENTY-THIRD BLADE INCHES 0.0280 |
| CPMW | BLADE THICKNESS | TWENTY-FIFTH BLADE INCHES 0.0300 |
| CPMW | BLADE THICKNESS | TENTH BLADE INCHES 0.0150 |
| CPMW | BLADE THICKNESS | ELEVENTH BLADE INCHES 0.0160 |
| CPMW | BLADE THICKNESS | FOURTEENTH BLADE INCHES 0.0190 |
| CPMW | BLADE THICKNESS | SEVENTEENTH BLADE INCHES 0.0220 |
| CPMW | BLADE THICKNESS | FIFTH BLADE INCHES 0.0100 |
| CPMW | BLADE THICKNESS | SIXTEENTH BLADE INCHES 0.0210 |
| CPMW | BLADE THICKNESS | TWENTY-FOURTH BLADE INCHES 0.0290 |
| CYMR | BLADE SHAPE | BENT END |
| FEAT | SPECIAL FEATURES | BLADES BENT AT 45 DEG |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 010298448. An older drawing citing one of those numbers resolves here.