NSN 3110-01-084-2530 · NIIN 010842530 · FSC 3110
NO DASHES 3110010842530
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Application: UH-60L/AH-64A ENGINE (T701C)
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 2.4014 AND INCHES MAXIMUM 2.4016 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 4.0397 AND INCHES MAXIMUM 4.0400 |
| AGAV | END ITEM IDENTIFICATION | UH-60L/AH-64A ENGINE (T701C) |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 1.7120 AND INCHES MAXIMUM 1.7170 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 1.9940 AND INCHES MAXIMUM 1.9990 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0038 AND INCHES MAXIMUM RADIAL 0.0046 AND INCHES NOMINAL AXIAL 0.0030 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P800 DEG F,C28.0 TO C32.0 ROCKWELL HARDNESS RETAINER |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER STEEL |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE SAE 52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE SAE 52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE SAE 52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE A-S 6414 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER RETAINER |
| PRMT | PRECIOUS MATERIAL | SILVER |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 99207-5034T0703 |
Supersedes
This item replaces cancelled NIINs 014786549 · 011335761. An older drawing citing one of those numbers resolves here.