NSN 5220-01-647-6932 · NIIN 016476932 · FSC 5220
NO DASHES 5220016476932
In Stock
GAGE,PROFILE
Inspection Gages and Precision Layout Tools
Technical characteristics
6 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC 81343-AS22520 TO 39 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | (R) CRIMPING TOOL,TERMINAL,HAND,ACUATED,WIRE TERMINATION,IN-SERVICE INSPECTION GAGE FOR AS22520/5,/37,/38,AND /44 CRIMP TOOLS |
| LGTH | LENGTH | INCHES 4.38 |
| CBBL | FEATURES PROVIDED | COMBINATION GO/NO-GO GAUGE |
| FEAT | SPECIAL FEATURES | MARK LEFT END "GO",COLOR GREEN;MARK RIGHT END "NO-GO",COLOR RED;HANDLE TO BE MARKED "DO NOT CRIMP GAGE";HANDLE MIDDLE TO BE MARKED WITH MFG'S NAME AND PART NUMBER;HANDLE BOTTOM TO BE MARKED WITH SAE PART NUMBER OF M22520/39-03;GAGE PIN MATL IS ALLOY TOOL STEEL PER ASTM A681,A295 OR EQUIV WITH ROCKWELL HARDNESS C55-64,CHROME PLTD PER AMS-QQ-C-320 CL 1,TY II OR CL 2 OR EQUIV THICKNESS;GAGE HANDLE MATL IS ALUM ALLOY PER ASTM B211 AND ALUM ALLOY BAR,ROD AND WIRE,ANODIZED IAW MIL-A-8625 OR EQUIV;GO END IS 1.00 INCH LONG,HAS THREE STEPPED DIAMETERS,FIRST STEP DIA IS 0.0720,SECOND STEP DIA IS 0.0940,THIRD STEP DIA IS 0.1000;NO-GO END IS 1.00 INCH LONG,HAS THREE STEPPED DIAMETERS,FIRST STEP DIA IS 0.0760,SECOND STEP DIA IS 0.0980,THRID STEP DIA IS 0.1040 |
| APGF | DESIGN TYPE | DOUBLE END |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M22520/39-03 | 81343 |
| M22520/39-03 | 81349 |
| SAE-AS22520/39-03 | 0U583 |