NSN 5315-00-986-2214 · NIIN 009862214 · FSC 5315
NO DASHES 5315009862214
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5613 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| FEAT | SPECIAL FEATURES | HAS 0.375 IN. DIA HOLE CENTERED IN SHOULDER END 1.830 IN. NOM DP |
| CRDY | FIRST END LOCATION | SHOULDER END |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.040 AND INCHES MAXIMUM 0.060 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.717 AND INCHES MAXIMUM 0.718 |
| STYL | STYLE DESIGNATOR | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.140 AND INCHES MAXIMUM 2.160 |
| AAHP | SECOND END STYLE | |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.085 |
| MATT | MATERIAL | OVERALL STEEL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| AAGZ | FIRST END STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2406 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.330 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.090 |
Supersedes
This item replaces cancelled NIIN 008829236. An older drawing citing one of those numbers resolves here.