NSN 5315-00-695-7777 · NIIN 006957777 · FSC 5315
NO DASHES 5315006957777
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.078 AND INCHES MAXIMUM 0.109 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.399 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.490 |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 1.672 AND INCHES MAXIMUM 1.703 |
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.5000 AND INCHES MAXIMUM 0.5005 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL MATERIAL RESPONSES QQ-S-624 |
| STYL | STYLE DESIGNATOR | |
| CSYM | SURFACE FINISH | SHANK END MICROINCHES 32.0 |
| HGTH | HEIGHT | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.172 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 OR STEEL COMP 8720 |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C NOMINAL 58.0 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 14.5 AND DEGREES MAXIMUM 15.5 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.609 AND INCHES MAXIMUM 0.641 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.453 AND INCHES MAXIMUM 1.484 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.135 AND INCHES MAXIMUM 0.145 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES MINIMUM 0.203 AND INCHES MAXIMUM 0.234 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.125 |