NSN 6105-01-159-6148 · NIIN 011596148 · FSC 6105
NO DASHES 6105011596148
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | SINGLE END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 36.250 |
| AAJU | OVERALL LENGTH | INCHES 42.060 |
| AAJV | OVERALL WIDTH | INCHES 25.000 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 1.000 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.960 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-15 DEG |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 449TNY |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 400.000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.940 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 11.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 25.000 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3600.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 18.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 450.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A3 AND THIRD STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT STYLE A2 IS 1.500 IN. DIA THREADED DOUBLE LEFT-HAND BY 1.500 IN. LG,FIT 3A;END OF SHAFT W/4 HOLES 0.500 IN. DIA BY 1.000 IN. DP,EQL SPACED |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 AND SOLDERLESS LUG 6 |