NSN 1680-00-534-1567 · NIIN 005341567 · FSC 1680
NO DASHES 1680005341567
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Miscellaneous Aircraft Accessories and Components
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.445 |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| AASA | THREAD LENGTH | BOTH ENDS INCHES NOMINAL 0.220 |
| ABSA | SPLINE QUANTITY | 12 |
| AEDN | TIP LENGTH | BOTH ENDS INCHES NOMINAL 0.500 |
| AGGZ | SHANK OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 0.500 |
| AAJD | THREAD CLASS | 2B |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 11.750 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | BOTH ENDS UNS |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 3.000 |
| MATT | MATERIAL | CASING STEEL |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | DIAMETER BOTH ENDS INCHES NOMINAL 0.406 |
| ZZZV | FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL LINEAR,AIRCRAFT |
| AAUJ | SPLINE MAJOR DIAMETER | BOTH ENDS INCHES NOMINAL 0.310 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 12.750 |
| AXYS | SPLINE TYPE | BOTH ENDS INVOLUTE |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| CFRM | TORSIONAL DEFLECTION RATING | 50 DEG FT-LB IN. TORSIONAL DEFLECTION IN WINDING DIRECTION,75 DEG FT-LBIN UNWINDING DIRECTION |
| ASDB | WIDTH ACROSS FLATS | BOTH ENDS INCHES NOMINAL 0.750 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 |
| AXFH | SPLINE LENGTH | BOTH ENDS INCHES NOMINAL 0.242 |
| CFRW | END OVERALL DIAMETER | BOTH ENDS INCHES NOMINAL 0.875 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 12.750 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.250 |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | BOTH ENDS ROUND, EXTERNAL SPLINED |
| AGJS | PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.250 |
| AGJR | MINOR DIAMETER | SPLINE BOTH ENDS INCHES NOMINAL 0.242 |