NSN 5305-00-012-1793 · NIIN 000121793 · FSC 5305
NO DASHES 5305000121793
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.438 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.163 |
| AASK | HEAD STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.312 |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.312 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-16232,TY 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 95.5 AND ROCKWELL B MAXIMUM 100.0 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 2 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 74000 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 121793 | 21450 |
| 121793 | 24617 |
| FF-S-85 | 81348 |
| FF-S-85 TY II ST 10P | 81348 |
| FFS85TYPE2STYLE10P | 81348 |
| 526761 | D9182 |
Supersedes
This item replaces cancelled NIINs 000180013 · 012314325. An older drawing citing one of those numbers resolves here.