NSN 5305-00-017-7355 · NIIN 000177355 · FSC 5305
NO DASHES 5305000177355
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE GR 1 OR 2 |
| CYAU | SCREW MATERIAL | STEEL |
| CQFM | HARDNESS RATING | ROCKWELL B MINIMUM 95.5 AND ROCKWELL B MAXIMUM 100.0 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.438 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.500 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM OR ZINC |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC 1ST TREATMENT RESPONSE QQ--416,TY 1,CL 3 OR FED SPEC 2ND TREATMENT RESPONSE QQ-Z-325,TY 1,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.500 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.163 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 177355 | 24617 |
| 177355 | 7X677 |
| FFS92TYPE1STYLE10S | 81348 |