NSN 5305-00-019-1678 · NIIN 000191678 · FSC 5305
NO DASHES 5305000191678
In Stock
SCREW,ASSEMBLED WASHER
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | BEARING SURFACE OF HEAD ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | PRIMARY WASHER ROCKWELL C MINIMUM 40.0 AND ROCKWELL C MAXIMUM 50.0 |
| CSPG | PRIMARY WASHER OUTSIDE DIAMETER | INCHES MINIMUM 0.567 AND INCHES MAXIMUM 0.590 |
| CTHW | PRIMARY WASHER STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.761 AND INCHES MAXIMUM 0.844 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.844 AND INCHES MAXIMUM 0.875 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.208 AND INCHES MAXIMUM 0.230 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.489 AND INCHES MAXIMUM 0.500 |
| AAVW | WASHER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416,TY 1,CL 3 OR FED SPEC 2ND TREATMENT RESPONSE QQ-Z-325,TY 1,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD ALL MATERIAL RESPONSES SAE |
| MATT | MATERIAL | OVERALL STEEL COMP 1020 OR STEEL COMP 1050 |
| FEAT | SPECIAL FEATURES | W/HEADER POINT |
| CTJJ | PRIMARY WASHER MATERIAL THICKNESS | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.034 |