NSN 5305-00-021-4839 · NIIN 000214839 · FSC 5305
NO DASHES 5305000214839
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.736 AND INCHES MAXIMUM 0.750 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.093 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ASXK | HOLE QUANTITY | 3 |
| BQDM | HOLE TYPE | DRILLED |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.250 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.323 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.062 AND INCHES MAXIMUM 1.250 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 8 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 120000 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| CMLP | THREAD QUANTITY PER INCH | 13 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 214839 | 21450 |
| FFS85TYPE2STYLE10P | 81348 |