NSN 5305-00-022-7005 · NIIN 000227005 · FSC 5305
NO DASHES 5305000227005
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.125 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.172 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.026 AND INCHES MAXIMUM 0.037 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.125 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2950-416C8G | 81312 |
| 2950-416C8G | 88245 |
| MS35249-8 | 96906 |