NSN 5305-00-050-0453 · NIIN 000500453 · FSC 5305
NO DASHES 5305000500453
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.690 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.594 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.313 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.406 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| FEAT | SPECIAL FEATURES | HEAD END HAS SLOT 0.060 WIDE BY 0.248 LONG,HEAD END ALSO DRILLED AND STEPPED 0.094 DIAMETER STEP DIAMETER 0.188 WITH 63 MICRO-INCH FINISH;THREAD END HAS 0.110 TIP BY 0.145 DIAMETER BEFORE THREAD STARTS,TIP HAS 0.040 DIAMETER HOLE THRU ON CENTERLINE;SCREW HAS RELIEF 0.965 FROM THEADED END 0.099 WIDE A 32 MICRO-INCH FINISH IN THIS AREA |
| MATT | MATERIAL | OVERALL STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL STD 10TH TREATMENT RESPONSE IL-S-5002 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 68410 | 93835 |