NSN 5305-00-058-2073 · NIIN 000582073 · FSC 5305
NO DASHES 5305000582073
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.168 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.188 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.083 AND INCHES MAXIMUM 0.086 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| MATT | MATERIAL | OVERALL STEEL |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.078 AND INCHES MAXIMUM 0.079 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.134 AND INCHES MAXIMUM 0.140 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 002860033 · 004989094 · 010163507 · 011971171. An older drawing citing one of those numbers resolves here.