NSN 5305-00-067-9916 · NIIN 000679916 · FSC 5305
NO DASHES 5305000679916
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.312 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.157 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.308 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.047 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.375 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 85000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYT | CHAMFER ANGLE | DEGREES MINIMUM 30.0 AND DEGREES MAXIMUM 45.0 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.190 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 190992 | 66503 |
| 43140-66 | 81982 |
| 5305PL0940349 | 9009H |
| MS24674-13 | 96906 |
Supersedes
This item replaces cancelled NIIN 006385847. An older drawing citing one of those numbers resolves here.