NSN 5305-00-080-0744 · NIIN 000800744 · FSC 5305
NO DASHES 5305000800744
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.250 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81348-FF-S-92 AND GOVERNMENT STANDARD 88044-AN500 TO CANCELED TO AND GOVERNMENT STANDARD 96906--S35366 TO CANCELED TO |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 4C AND SIZE 4-40 |
| CYAU | SCREW MATERIAL | STEEL COMP 430 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS 4 OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- F- OR G |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.250 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.072 AND INCHES MAXIMUM 0.079 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.183 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AASK | HEAD STYLE |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 002076674. An older drawing citing one of those numbers resolves here.