NSN 5305-00-080-3076 · NIIN 000803076 · FSC 5305
NO DASHES 5305000803076
In Stock
SETSCREW
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUY | POINT LENGTH | INCHES NOMINAL 0.095 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.188 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.064 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.562 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 45.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| AAVA | POINT DIAMETER | INCHES NOMINAL 0.125 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ASXK | HOLE QUANTITY | 1 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.455 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.613 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758,COND D4 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5313-5 | 02121 |