NSN 5305-00-081-5683 · NIIN 000815683 · FSC 5305
NO DASHES 5305000815683
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 84.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.094 |
| ABQZ | INTERNAL DRIVE STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 43.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.454 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.500 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.311 AND INCHES MAXIMUM 0.359 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5543973 PIECE 6 | 43689 |
| 5343973 PIECE 6 | 43689 |
| 5343973 PIECE 6 | 53711 |
| NASM24667-14 | 80205 |
| MS24667-14 | 80205 |
| FFS86 | 81348 |
| FF-S-86 TY 4 | 81349 |
| MS24667-14 | 96906 |
| FF-S-86TY4 0.16 4-32UNC2AX0.50 | D9182 |
Supersedes
This item replaces cancelled NIINs 006191340 · 012916611. An older drawing citing one of those numbers resolves here.