NSN 5305-00-081-6668 · NIIN 000816668 · FSC 5305
NO DASHES 5305000816668
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.191 AND INCHES MAXIMUM 0.225 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.250 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.250 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASK | HEAD STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-630 OR FED SPEC 1ST MATERIAL RESPONSE QQ-S-631 OR FED SPEC 1ST MATERIAL RESPONSE QQ-S-634 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS24693-C02 | 19606 |
| 60087110 | 30669 |
| 55-0209-4-4 | 72914 |
| NASM24693-S2 | 80205 |
| MS24693S2 | 80205 |
| AN507-440R4 | 81352 |
| AN507-440R4 | 88040 |
| 5305PL0684438 | 9009H |
| MS24693-S2 | 96906 |
| AN507-440R4 | D9182 |
| 10124965 | A486G |
| MS24693S2 | D9182 |
| 4177085-6 | D9182 |
| MS24693-S3 | 07ZN5 |
| 4-40X25LGFLHD | 08289 |
Supersedes
This item replaces cancelled NIINs 000678970 · 006390556 · 008106714 · 008184600 · 008412109 · 008363609. An older drawing citing one of those numbers resolves here.