NSN 5305-00-105-8672 · NIIN 001058672 · FSC 5305
NO DASHES 5305001058672
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD |
| AASK | HEAD STYLE | |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.317 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.385 AND INCHES MAXIMUM 0.432 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.387 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MATT | MATERIAL | OVERALL STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |