NSN 5305-00-107-1984 · NIIN 001071984 · FSC 5305
NO DASHES 5305001071984
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.254 AND INCHES MAXIMUM 0.357 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.550 AND INCHES MAXIMUM 0.597 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.496 AND INCHES MAXIMUM 0.510 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD |
| MATT | MATERIAL | OVERALL STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.