NSN 5305-00-112-1227 · NIIN 001121227 · FSC 5305
NO DASHES 5305001121227
In Stock
SETSCREW
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAUY | POINT LENGTH | INCHES MINIMUM 0.251 AND INCHES MAXIMUM 0.280 |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.127 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CWDK | POINT CHAMFER ANGLE | DEGREES MINIMUM 40.0 AND DEGREES MAXIMUM 50.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE EK155,FSC- 19139 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.341 AND INCHES MAXIMUM 0.345 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.596 AND INCHES MAXIMUM 0.621 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.050 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 465020 | 19139 |