NSN 5305-00-121-8118 · NIIN 001218118 · FSC 5305
NO DASHES 5305001218118
In Stock
SCREW,ASSEMBLED WASHER
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.144 |
| AAVW | WASHER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FASTENER ASSN STD SINGLE MATERIAL RESPONSE SAE |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.473 AND INCHES MAXIMUM 0.492 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.619 AND INCHES MAXIMUM 0.650 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.750 |
| AASK | HEAD STYLE | |
| CQFM | HARDNESS RATING | FASTENER ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | PRIMARY WASHER ROCKWELL C MINIMUM 40.0 AND ROCKWELL C MAXIMUM 50.0 |
| CSPG | PRIMARY WASHER OUTSIDE DIAMETER | INCHES MINIMUM 0.494 AND INCHES MAXIMUM 0.506 |
| CTHW | PRIMARY WASHER STYLE | |
| CTJJ | PRIMARY WASHER MATERIAL THICKNESS | INCHES NOMINAL 0.025 |
| MATT | MATERIAL | FASTENER STEEL COMP 1022 |
| MATT | MATERIAL | PRIMARY WASHER STEEL COMP 1050 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | PRIMARY WASHER ASSN STD SINGLE MATERIAL RESPONSE SAE |
| AAJD | THREAD CLASS | 2A |