NSN 5305-00-141-7324 · NIIN 001417324 · FSC 5305
NO DASHES 5305001417324
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 26512-GB510F |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.313 AND INCHES MAXIMUM 0.363 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.323 AND INCHES MAXIMUM 1.353 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.387 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GB510F3-16 | 26512 |
| GB510CH3-16 | 27624 |
| GB510CH3-16 | 26512 |
| 66584-3-16 | 50392 |
| GB510CH3-16 | 56878 |
| 66584-3-16 | 56878 |
| GB510CH3-16 | 58845 |
| HT260LB3-16 | 73197 |
| 66584-3-16 | 80539 |
| HT8100-3-16 | 92215 |
| BM19024-3-16 | 97928 |
| T150-3-16 | 97928 |
| HT260LB3-16 | L4528 |
| HT8100-3-16 | 06950 |
| BM19024-3-16 | 17446 |
| T150-3-16 | 17446 |