NSN 5305-00-144-3907 · NIIN 001443907 · FSC 5305
NO DASHES 5305001443907
In Stock
SCREW,MACHINE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.050 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.161 AND INCHES MAXIMUM 0.170 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.389 AND INCHES MAXIMUM 0.414 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.750 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.750 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FFS92ANDTYPE1ANDSTYLE5S | 81348 |
| AN500A416-28 | 88044 |
| AC500A416-28 | 88049 |
Supersedes
This item replaces cancelled NIIN 002761706. An older drawing citing one of those numbers resolves here.