NSN 5305-00-145-6379 · NIIN 001456379 · FSC 5305
NO DASHES 5305001456379
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.736 AND INCHES MAXIMUM 0.750 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.092 AND INCHES MAXIMUM 0.100 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL2 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.156 AND INCHES MAXIMUM 3.250 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.323 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.250 AND INCHES MAXIMUM 1.438 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 34.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD ALL MATERIAL RESPONSES 66 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 AND GRADE 5 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FF-S-85C TY II ST 10P | 81348 |
| FFS85 | 81348 |
| MS51096-421 | 96906 |