NSN 5305-00-145-6971 · NIIN 001456971 · FSC 5305
NO DASHES 5305001456971
In Stock
SCREW,MACHINE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.046 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6050 OR MIL STD SINGLE MATERIAL RESPONSE AN-S-9 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.113 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.344 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.375 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| AAJD | THREAD CLASS | 3A |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 002714894 · 002642204 · 009973127. An older drawing citing one of those numbers resolves here.