NSN 5305-00-146-7189 · NIIN 001467189 · FSC 5305
NO DASHES 5305001467189
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R54520 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS621,CO- 6AL-4V |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.531 AND INCHES MAXIMUM 0.558 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.933 AND INCHES MAXIMUM 0.963 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.423 AND INCHES MAXIMUM 0.473 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 59.75 AND DEGREES MAXIMUM 60.25 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| FEAT | SPECIAL FEATURES | BEARING SURFACE OF HEAD GROOVED TO 0.394 IN. MIN 0.396 IN. MAX DIA,0.092 IN. MIN 0.097 IN. MAX LG FROM TOP OF HEAD |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 64040V5-8 | 56878 |
| C387V5-8 | 56878 |
| HR101V-5-8 | 73197 |
| C387V5-8 | 73197 |
| 64040V5-8 | 80539 |
| C387V5-8 | 81755 |
| VT1039V5-8 | 92215 |
| C387V5-8 | 92215 |
| C387V5-8 | 93907 |
| CS318642V5-8 | 93907 |
| C387V5-8 | L4528 |
| C387V5-8 | 06950 |
| C387V5-8 | 06725 |
| AIC1023V5-8 | 06725 |