NSN 5305-00-150-9215 · NIIN 001509215 · FSC 5305
NO DASHES 5305001509215
In Stock
SCREW,MACHINE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.416 AND INCHES MAXIMUM 1.594 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.562 AND INCHES MAXIMUM 1.625 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.292 AND INCHES MAXIMUM 0.313 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.123 AND INCHES MAXIMUM 0.130 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ASXK | HOLE QUANTITY | 2 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6050 OR MIL STD SINGLE MATERIAL RESPONSE AN-S-9 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AN503-10-26 | 3LRU1 |
| AN503-10-26 | 88044 |
| 23956 | 99167 |
| 33 | 11599 |
Supersedes
This item replaces cancelled NIINs 002863485 · 002642197. An older drawing citing one of those numbers resolves here.