NSN 5305-00-151-3238 · NIIN 001513238 · FSC 5305
NO DASHES 5305001513238
In Stock
SCREW,MACHINE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.813 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.813 AND INCHES MAXIMUM 1.875 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.348 AND INCHES MAXIMUM 0.385 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 2330 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 3C |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY MATL,MIN TENSILE STRENGTH AND HARDNESS RATING |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FFS92ANDTYPE3ANDSTYLE3C | 81348 |
| AN507 | 88044 |