NSN 5305-00-151-9893 · NIIN 001519893 · FSC 5305
NO DASHES 5305001519893
In Stock
SETSCREW
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.760 AND INCHES MAXIMUM 0.880 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.000 AND INCHES MAXIMUM 2.060 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.151 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.312 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.019 AND INCHES MAXIMUM 0.031 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.384 AND INCHES MAXIMUM 0.414 |
| AAUY | POINT LENGTH | INCHES NOMINAL 0.200 |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.135 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 34.0 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 30S33S5,FSC- 16764 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE G- 4341--,FSC- 24617 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |