NSN 5305-00-156-2357 · NIIN 001562357 · FSC 5305
NO DASHES 5305001562357
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.454 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.641 AND INCHES MAXIMUM 0.687 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.283 AND INCHES MAXIMUM 0.332 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6050 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6049 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 836769-00 | 32345 |
| MILS7839 | 80205 |
| MILS7839 | 81349 |
| 4177010-62 | 82577 |
| AN509-8R10 | 88044 |
| AN509-8R10REV2 | 88044 |
| 4177010-62 | 05869 |
Supersedes
This item replaces cancelled NIINs 002740302 · 006143464 · 007023632. An older drawing citing one of those numbers resolves here.