NSN 5305-00-156-2777 · NIIN 001562777 · FSC 5305
NO DASHES 5305001562777
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.214 AND INCHES MAXIMUM 0.250 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.250 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.146 AND INCHES MAXIMUM 0.162 |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.069 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CYAU | SCREW MATERIAL | STEEL OR STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 2ND MATERIAL RESPONSE QQ-S-630 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-631 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-634 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY INTERNAL DRIVE STYLE AND LOCATION |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY INTERNAL DRIVE STYLE AND INTERNAL DRIVE LOCATION |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FFS92ANDTYPE3ANDSTYLE1 | 81348 |
| AN515-2R4 | 88044 |
| 1562777 | 00000 |
Supersedes
This item replaces cancelled NIINs 002860217 · 006984052. An older drawing citing one of those numbers resolves here.