NSN 5305-00-177-5444 · NIIN 001775444 · FSC 5305
NO DASHES 5305001775444
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.294 AND INCHES MAXIMUM 0.375 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.375 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.205 AND INCHES MAXIMUM 0.219 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING OR STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-S-763,300 SERIES OR FED STD 1ST MATERIAL RESPONSE 66,300 SERIES OR ASSN STD 2ND MATERIAL RESPONSE CO- 16-18 OR 18-8 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 9C |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FF-S-92 | 81348 |
| MIL-STD-130 | 81349 |
| MIL-F-18240 | 81349 |
| LP51957-15 | 03838 |
| 411-015-106 | 07421 |
Supersedes
This item replaces cancelled NIIN 002467409. An older drawing citing one of those numbers resolves here.