NSN 5305-00-185-9651 · NIIN 001859651 · FSC 5305
NO DASHES 5305001859651
In Stock
SETSCREW
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.155 AND INCHES MAXIMUM 0.156 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.320 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.180 AND INCHES MAXIMUM 1.198 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 2A |
| CWDK | POINT CHAMFER ANGLE | DEGREES MINIMUM 35.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 410 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.330 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.270 |
| AAUY | POINT LENGTH | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.908 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.060 |