NSN 5305-00-193-1074 · NIIN 001931074 · FSC 5305
NO DASHES 5305001931074
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.060 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.345 AND INCHES MAXIMUM 0.375 |
| AASK | HEAD STYLE | |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS662 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.119 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 80 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 302 OR STEEL COMP 303 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.356 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1068-5C | 27624 |
| NAS662C0-6 | 80205 |
| 106751-00-5C | 80539 |
| FF-S-92 | 81348 |
| 965813-5C | 82577 |
| E125-5 | 97928 |
| E125-5 | 17446 |
Supersedes
This item replaces cancelled NIIN 011476722. An older drawing citing one of those numbers resolves here.