NSN 5305-00-217-9173 · NIIN 002179173 · FSC 5305
NO DASHES 5305002179173
In Stock
SETSCREW
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.396 AND INCHES MAXIMUM 0.541 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.784 AND INCHES MAXIMUM 0.808 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.194 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.625 |
| AAUY | POINT LENGTH | INCHES MINIMUM 0.138 AND INCHES MAXIMUM 0.142 |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.238 AND INCHES MAXIMUM 0.242 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.3470 TO 0.3500 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CWDK | POINT CHAMFER ANGLE | DEGREES MINIMUM 45.0 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 1 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003715206. An older drawing citing one of those numbers resolves here.