NSN 5305-00-249-0533 · NIIN 002490533 · FSC 5305
NO DASHES 5305002490533
In Stock
SETSCREW
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.188 |
| AASK | HEAD STYLE | |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.188 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 4 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 53.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 OR FED SPEC 2ND TREATMENT RESPONSE QQ-Z-325,TYE 2,CLASS 3 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.062 AND INCHES MAXIMUM 0.063 |
| MATT | MATERIAL | OVERALL STEEL COMP 4037 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SSS62C6 | 80249 |
| G | 81349 |
| 411119-21 | 96214 |
| MS51017-21 | 96906 |