NSN 5305-00-251-8296 · NIIN 002518296 · FSC 5305
NO DASHES 5305002518296
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.454 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.454 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.176 AND INCHES MAXIMUM 0.183 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.108 AND INCHES MAXIMUM 0.112 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.095 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 112-40NC2AX7/16 | 70318 |
| NAS1352C04-7 | 80205 |
| FF-S-86E | 81348 |
| H667160407 | 88818 |
| 5305PL0728666 | 9009H |
| 5340002518296 | A00AM |
| 4-40X7/16INX12C | C7019 |
| 10125079 | A486G |
| B70337 | K0967 |
| 1446214-26 | 10001 |
Supersedes
This item replaces cancelled NIINs 000639821 · 001197546 · 008539411 · 009687693 · 010174108. An older drawing citing one of those numbers resolves here.