NSN 5305-00-270-2905 · NIIN 002702905 · FSC 5305
NO DASHES 5305002702905
In Stock
SCREW,MACHINE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.113 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.046 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.781 AND INCHES MAXIMUM 0.812 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 2ND MATERIAL RESPONSE QQ-S-630 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-631 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-634 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CYAU | SCREW MATERIAL | STEEL OR STEEL COMP 1010 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| ASXK | HOLE QUANTITY | 1 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.812 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.270 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FFS92TYPE1STYLE5S | 81348 |
| AN500 | 81352 |
Supersedes
This item replaces cancelled NIIN 000646435. An older drawing citing one of those numbers resolves here.