NSN 5305-00-271-8038 · NIIN 002718038 · FSC 5305
NO DASHES 5305002718038
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 62000 |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.086 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.450 AND INCHES MAXIMUM 0.500 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.193 AND INCHES MAXIMUM 0.211 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 3 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.500 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYBA | SCREW SURFACE TREATMENT | ANODIZE |
| CYAU | SCREW MATERIAL | ALUMINUM ALLOY 2024 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FFS92ANDTYPE1ANDSTYLE1S | 81348 |
| AN515DD48 | 81352 |
| AN515DD4-8 | 88044 |
Supersedes
This item replaces cancelled NIIN 001753190. An older drawing citing one of those numbers resolves here.