NSN 5305-00-272-7169 · NIIN 002727169 · FSC 5305
NO DASHES 5305002727169
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| CMLP | THREAD QUANTITY PER INCH | 10 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 125.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.500 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.500 |
| AASK | HEAD STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 43.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 1.107 AND INCHES MAXIMUM 1.125 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.631 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.750 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 138388 | 24617 |
| 138388 | 30379 |
| MS35455-135 | 96906 |
| 138388 | 97907 |
Supersedes
This item replaces cancelled NIIN 000138388. An older drawing citing one of those numbers resolves here.