NSN 5305-00-281-4529 · NIIN 002814529 · FSC 5305
NO DASHES 5305002814529
In Stock
SETSCREW
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.687 |
| AASK | HEAD STYLE | |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CWDK | POINT CHAMFER ANGLE | DEGREES MINIMUM 14.0 AND DEGREES MAXIMUM 15.0 |
| FEAT | SPECIAL FEATURES | THREAD RELIEVED 0.328 IN. DIA BY 0.062 IN. LG UNDER HEAD |
| MATT | MATERIAL | OVERALL STEEL COMP 1020 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-630 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-S-631 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-S-634 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ABQJ | POINT STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.156 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.375 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.064 |
| AAUY | POINT LENGTH | INCHES MINIMUM 0.362 AND INCHES MAXIMUM 0.374 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.314 AND INCHES MAXIMUM 0.326 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 201566 | 23926 |