NSN 5305-00-281-6390 · NIIN 002816390 · FSC 5305
NO DASHES 5305002816390
In Stock
SCREW,ASSEMBLED WASHER
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.312 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FASTENER ASSN STD 1ST MATERIAL RESPONSE AST- A575 OR ASSN STD 1ST MATERIAL RESPONSE AST- A576 OR ASSN STD 1ST MATERIAL RESPONSE AST- A108 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-11310 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND DICHROMATE |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.208 AND INCHES MAXIMUM 0.226 |
| AAVW | WASHER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CSPG | PRIMARY WASHER OUTSIDE DIAMETER | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.231 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CTJJ | PRIMARY WASHER MATERIAL THICKNESS | INCHES NOMINAL 0.031 |
| MATT | MATERIAL | FASTENER STEEL COMP 1020 OR STEEL COMP 1010 |
| MATT | MATERIAL | PRIMARY WASHER STEEL |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.086 AND INCHES MAXIMUM 0.096 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.375 |
| AASK | HEAD STYLE | |
| CTHW | PRIMARY WASHER STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 000451633 · 002855280. An older drawing citing one of those numbers resolves here.