NSN 5305-00-282-9494 · NIIN 002829494 · FSC 5305
NO DASHES 5305002829494
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.073 |
| CMLP | THREAD QUANTITY PER INCH | 72 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.126 AND INCHES MAXIMUM 0.146 |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.125 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.023 AND INCHES MAXIMUM 0.030 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-B-613 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-B-626 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-W-321 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.125 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FFS92ANDTYPE1ANDSTYLE2 | 81348 |
| AN510B1-2 | 88044 |
Supersedes
This item replaces cancelled NIINs 002718760 · 005766398. An older drawing citing one of those numbers resolves here.