NSN 5305-00-283-4582 · NIIN 002834582 · FSC 5305
NO DASHES 5305002834582
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.5 AND DEGREES MAXIMUM 100.5 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.044 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.381 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.380 AND INCHES MAXIMUM 0.447 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.875 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| FEAT | SPECIAL FEATURES | FURNISHED WITH ONE O-RING SEAL |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS621 CO- 6AL-4V OR ASSN STD SINGLE MATERIAL RESPONSE A-S4928 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M430V3-7AS | 1VSL7 |
| 110179-3-7AS | 56878 |
| ST3M430V3-7AS | 58998 |
| WC8137-3-7AS | 60516 |
| HT271A3-7 | 73197 |
| ST3M430V3-7AS | 76301 |
| 110179-3-7AS | 80539 |
| HT8137-3-7AS | 92215 |
| BM33024V3-7U | 97928 |
| 10125106 | A486G |
| 110179-3-7AS | K5673 |
| HT271A3-7 | L4528 |
| HT8137-3-7AS | 06950 |
| BM33024V3-7U | 17446 |