NSN 5305-00-283-4585 · NIIN 002834585 · FSC 5305
NO DASHES 5305002834585
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.765 AND INCHES MAXIMUM 0.812 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.443 AND INCHES MAXIMUM 0.510 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| FEAT | SPECIAL FEATURES | FURNISHED WITH ONE O-RING SEAL |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.5 AND DEGREES MAXIMUM 100.5 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.071 AND INCHES MAXIMUM 0.073 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.502 AND INCHES MAXIMUM 0.507 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS621 CO- 6AL-4V OR ASSN STD SINGLE MATERIAL RESPONSE A-S4928 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M430V4-5AS | 1VSL7 |
| 110179-4-5AS | 56878 |
| ST3M430V4-5AS | 58998 |
| WC8137-4-5A | 60516 |
| HT271A4-5 | 73197 |
| ST3M430V4-5AS | 76301 |
| 110179-4-5AS | 80539 |
| HT8137-4-5AS | 92215 |
| BM33024V4-5U | 97928 |
| HT271A4-5 | L4528 |
| 110197-4-5AS | K5673 |
| ST3M430V4-5AS | 007R1 |
| HT8137-4-5AS | 06950 |
| BM33024V4-5U | 17446 |