NSN 5305-00-285-1275 · NIIN 002851275 · FSC 5305
NO DASHES 5305002851275
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.626 AND INCHES MAXIMUM 0.688 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY INTERNAL DRIVE STYLE AND LOCATION AND FASTENER LENGTH |
| AAJD | THREAD CLASS | 2A |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.334 AND INCHES MAXIMUM 0.359 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CYAU | SCREW MATERIAL | STEEL OR STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 2ND MATERIAL RESPONSE QQ-S-630 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-631 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-634 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.137 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.656 AND INCHES MAXIMUM 0.688 |
| AASK | HEAD STYLE |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 417 776 | 77294 |
| AN520-10R10 | 88044 |
Supersedes
This item replaces cancelled NIIN 008859910. An older drawing citing one of those numbers resolves here.