NSN 5305-00-297-2527 · NIIN 002972527 · FSC 5305
NO DASHES 5305002972527
In Stock
SETSCREW
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ABQZ | INTERNAL DRIVE STYLE | |
| ABQJ | POINT STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.435 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.375 |
| AASK | HEAD STYLE | |
| AASM | BOTTOM COUNTERSINK DIAMETER | INCHES NOMINAL 0.391 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.625 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.469 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.2830 TO 0.2849 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 130000 |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 136313 | 0AHP5 |
Supersedes
This item replaces cancelled NIIN 001674102. An older drawing citing one of those numbers resolves here.