NSN 5305-00-297-8235 · NIIN 002978235 · FSC 5305
NO DASHES 5305002978235
In Stock
SCREW,MACHINE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.183 |
| AAJD | THREAD CLASS | 2A |
| AASK | HEAD STYLE | |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.037 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.512 AND INCHES MAXIMUM 0.562 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND STYLE 5S |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.562 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.072 AND INCHES MAXIMUM 0.079 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8599247-110 | 24617 |
| FFS92ANDTYPE1ANDSTYLE5S | 81348 |
| AN500C4-9 | 88044 |
| AN500 | 88044 |
| 8599247-110 | 09691 |
Supersedes
This item replaces cancelled NIINs 000205128 · 008278944. An older drawing citing one of those numbers resolves here.